LEFT MENU

5-stage RO system with stand

Model No.
RO-3816
Made in
Taiwan
Request for Quotation

    ~ PURE WATER MADE EASY ~

    Spec

    • Type:Reverse Osmosis
    • Use:Under Sink

    Key Features

    Products Features
    1. Size: L30 x W17 x H42 (cm)
    2. Net Weight: 6 Kgs
    3. Pure water: 50GPD/per day
    4. Waste water: 1:3
    5. NSF tank: 4 gallon

     Model:

     AIP-12 5m 

    AIC-12

    AIP-12 1m

    MBS1050CHT-NSF 

    AIC-10NSF 

     Type

     PP sediment cartridge with 5 ~ 10 micron

     Granular activated carbon 

     PP sediment cartridge with 1 micron

      NSF approved 50GPD membrane

     NSF approved 10" post in-line filter(GAC)

    ALYA Brand Spirit

    5-stage RO system with stand

    Our Company

    5-stage RO system with stand

    Flow of orders

    5-stage RO system with stand

    Quality Control Procedure

    5-stage RO system with stand

    Global Product Liability Insurance

    Certificates

    5-stage RO system with stand

    How to solve trouble shotting of RO

    If your RO reverse osmosis water machine is within guarantee period, then there are any problems, you should be able to get free service, but if it is out of guarantee period, then you can save some maintenance charges, you can give it a try as following trouble shooting methods.

    Q:The machine stops running, there is still water flows out from water tubes.
    A:/Water inlet of solenoid valves are blocked, they can't shut off water inlet.
    Counter measures1:Check if raw water is shut on, if power is plugged in ?

    5-stage RO system with stand

    5-stage RO system with stand

    Counter measures2:Take apart it for maintenance or replacement.

    Q:Motor would not start, cannot produce water.
    A:/1. Is power supply plugged in?  Is there power supplied?
    Counter measures:Plug in the power supply.

    5-stage RO system with stand

    A:/2. Low water supply pressure, low-pressure protection switch cuts off the electricity for protection.
    Counter measures:Check water supply to see if there is sufficient water.

    5-stage RO system with stand

    Q:The water source has cut off, the booster pump still operating.
    A:/1.  The nuts under the gooseneck faucet are not tightened.
    Counter measures:Locks the nut.

    5-stage RO system with stand

    A:/2. When connect the gooseneck faucet, the insert doesn't be put into PE tube.
    Counter measures:Put into the insert to lock again.

    5-stage RO system with stand

    A:/3. Pipeline leaking.
    Counter measures:Discovers the water leakage place to eliminate the defects.

    5-stage RO system with stand

    A:/4. The check valve of the membrane housing losses efficiency.
    Counter measures:Replace the membrane housing.

    5-stage RO system with stand

    Q:Water leaking for booster pump.
    A:/1. All filter cartridge between first to third stage are plugged. This leads to pump with no water and runs empty and is damaged.
    A:/2. Aging motor internal separation membrane losses elasticity, or water scale blockage.
    A:/3. Large molecule limiter blocked, water cannot pass through.
    Counter measures:Please contact technicians or distributor.

    5-stage RO system with stand

    Q:Pump operation normally, but cannot produce water.
    A:/1. RO membrane blocked by calcium compounds.
    Counter measures:Replace RO membrane.

    5-stage RO system with stand

    A:/2. Motor losses pressure, operation but no feeding pressure.
    Counter measures:Check if raw water is opened.

    5-stage RO system with stand

    A:/3. Water inlet of solenoid valves were broken , without water inlet.
    Counter measures:Please contact technicians or distributor.

    5-stage RO system with stand

    A:/4. Piping leak.
    Counter measures:Clean water leaks inside the machine.

    Q:The water production rate reduces, and water flow decreases.
    A:/1. RO membrane blockage.
    Counter measures:Replace RO membrane.

    5-stage RO system with stand

    A:/2. AIC-10 post in-line GAC cartridge is blocked.
    Counter measures:Replace AIC-10 post in-line GAC cartridge.

    5-stage RO system with stand

    A:/3. Pump pressure does not reach standard.
    Counter measures:Please contact technicians or distributor.

    5-stage RO system with stand

    A:/4. The pressure of Ro tank is not enough.
    Counter measures:Add 7 psi unit of air pressure into ro tank.

    5-stage RO system with stand

    Q:Solenoid valve operate continuously.
    A:/Insufficient pressure for water inlet.
    Counter measures:Please contact technicians or distributor.

    Q:Odor in water
    A:/1. Activated carbon filter element loss efficiency.
    Counter measures:Replace activated carbon filter element.

    5-stage RO system with stand

    A:/2. Membrane breaks or losses efficiency.
    Counter measures:Replace RO membrane.

    5-stage RO system with stand

    If the situation is not improved , please contact distributor.

    5-stage RO system with stand

    Q:Pure water TDS (total dissolve solid) increases.
    A:/1. Membrane losses efficiency.
    Counter measures:Replace RO membrane.

    5-stage RO system with stand

    A:/2. The housing or inside part of Ro membrane got broken.
    Counter measures:Replace RO membrane or contact distributor.

    5-stage RO system with stand

    Q:Difficultly remove the PE tube from fitting.
    A:/Internal pressure of tube become condensed.
    Counter measures:Cut off water source and discharge the water on the tube and release.

    5-stage RO system with stand

    Q:Gooseneck faucet drip water
    A:/Ceramic sheet in the ceramic center plug eroded.
    Counter measures:Replace gooseneck faucet.

    5-stage RO system with stand

    Article written from Rodger Lin, Alya Water

    Main Export Market

    ASIA ,MID-EAST